view_transf#

class ansys.api.pyensight.ensight_api.view_transf(session: Session)#

Class wrapper for EnSight view_transf module

This class acts as a proxy for the EnSight Python module ensight.view_transf

Methods

view_transf.action(p0)

Sets the transformation method for interaction in the user interface.

view_transf.align2D(p0, p1, p2, p3)

View_transf: align2D

view_transf.axis(p0)

Sets the axis to use for rotate, translate, and scale transformations.

view_transf.band_zoom_expand_from(p0)

This command has not yet been documented.

view_transf.box_axis(p0, p1, p2, p3)

Specify the direction vectors for a box tool.

view_transf.box_length(p0, p1, p2)

Specify the size of the box tool in the x, y, and z directions.

view_transf.box_origin(p0, p1, p2)

Specify the origin of the box tool in reference to the selected coordinate frame.

view_transf.camera_desc(p0)

This command has not yet been documented.

view_transf.camera_direction_xyz(p0, p1, p2)

This command has not yet been documented.

view_transf.camera_focus(p0)

This command has not yet been documented.

view_transf.camera_focus_distprojpln(p0)

View_transf: camera_focus_distprojpln

view_transf.camera_focus_forwardxyz(p0, p1, p2)

This command has not yet been documented.

view_transf.camera_focus_partnode(p0, p1)

This command has not yet been documented.

view_transf.camera_lens(p0)

This command has not yet been documented.

view_transf.camera_location_fromfile(p0)

View_transf: camera_location_fromfile

view_transf.camera_origin(p0)

This command has not yet been documented.

view_transf.camera_origin_offset(p0, p1, p2)

This command has not yet been documented.

view_transf.camera_origin_partnode(p0, p1)

This command has not yet been documented.

view_transf.camera_origin_scalefactor(p0)

View_transf: camera_origin_scalefactor

view_transf.camera_origin_spline(args)

This command has not yet been documented.

view_transf.camera_origin_splinevalue(p0)

This command has not yet been documented.

view_transf.camera_origin_xyz(p0, p1, p2)

This command has not yet been documented.

view_transf.camera_size(p0)

This command has not yet been documented.

view_transf.camera_up_xyz(p0, p1, p2)

This command has not yet been documented.

view_transf.camera_view_angle(p0)

This command has not yet been documented.

view_transf.camera_visible(p0)

This command has not yet been documented.

view_transf.cameraselect_byname_begin(*args, ...)

This command has not yet been documented.

view_transf.cameraselect_byname_end()

This command has not yet been documented.

view_transf.cameratoview_compute()

View_transf: cameratoview_compute

view_transf.cameratoview_direction(p0, p1, p2)

View_transf: cameratoview_direction

view_transf.cameratoview_focaldist(p0)

View_transf: cameratoview_focaldist

view_transf.cameratoview_focalpoint(p0, p1, p2)

View_transf: cameratoview_focalpoint

view_transf.cameratoview_readfile(p0)

View_transf: cameratoview_readfile

view_transf.cameratoview_rotation(p0)

View_transf: cameratoview_rotation

view_transf.center_of_transform(p0, p1, p2)

Set the point in space that will be the origin for transformations.

view_transf.clipping(p0)

View_transf: clipping

view_transf.cone(p0, p1, p2, p3)

View_transf: cone

view_transf.cone_angle(p0)

Set the angle for the cone tool.

view_transf.cone_axis(p0, p1, p2)

Sets the axis for the cone tool.

view_transf.cone_origin(p0, p1, p2)

Sets the origin point for the tip of the cone tool.

view_transf.cursor(p0, p1, p2)

Sets the location of the cursor tool.

view_transf.cursor_by_partijk(p0, p1, p2, p3)

This command has not yet been documented.

view_transf.cursor_by_partnameijk(p0, p1, p2, p3)

View_transf: cursor_by_partnameijk

view_transf.cylinder(p0, p1, p2, p3)

View_transf: cylinder

view_transf.cylinder_axis(p0, p1, p2)

Sets the axis for the cylinder tool.

view_transf.cylinder_length(p0)

View_transf: cylinder_length

view_transf.cylinder_origin(p0, p1, p2)

Sets the origin point for one end of the cylinder tool.

view_transf.cylinder_radius(p0)

Set the radius value for the cylinder tool.

view_transf.dialog_visible(p0)

This command has not yet been documented.

view_transf.distance(p0)

Sets the distance from the look_from to the look_at point.

view_transf.fit(p0)

Appropriate scaling and translations are done so that the visible parts fit in the selected viewport.

view_transf.fit_current_viewport()

View_transf: fit_current_viewport

view_transf.function(p0)

Sets the transformation mode.

view_transf.initialize_viewports()

Resets transformations, look_at viewing parameters, and z clipping to the original values applied when model was first displayed.

view_transf.limit(p0)

Sets value represented by the extreme ends of the transformation slider in the transformation dialog.

view_transf.line(p0, p1, p2, p3)

Sets the location of the line tool by setting two endpoints.

view_transf.line_by_nodeids(p0, p1)

This command has not yet been documented.

view_transf.line_length(p0)

Changes the line tool length.

view_transf.look_at(p0, p1, p2)

Sets the look_at point for the selected viewport(s).

view_transf.look_from(p0, p1, p2)

Sets the look_from point for the selected viewport(s).

view_transf.mode(p0)

This command has not yet been documented.

view_transf.plane(p0, p1, p2, p3)

Sets the location of the plane tool by setting three corner points.

view_transf.plane_by_nodeids(p0, p1, p2)

This command has not yet been documented.

view_transf.plane_equation(p0, p1, p2, p3)

Sets the location of the plane tool by specifying the coefficients of the plane equation (Ax + By + Cz = D).

view_transf.plane_normal(p0, p1, p2)

Specify the plane tool orientation.

view_transf.plane_origin(p0, p1, p2)

Specify the plane tool origin.

view_transf.plane_size(p0, p1)

Specify the plane tool size.

view_transf.query_composite_matrix(args)

View_transf: query_composite_matrix

view_transf.query_lookat_position(args)

View_transf: query_lookat_position

view_transf.query_lookfrom_position(args)

View_transf: query_lookfrom_position

view_transf.query_perang(args)

View_transf: query_perang

view_transf.query_proj_matrix(args)

View_transf: query_proj_matrix

view_transf.query_rotate_matrix(args)

View_transf: query_rotate_matrix

view_transf.query_scale_matrix(args)

View_transf: query_scale_matrix

view_transf.query_transform_center(args)

View_transf: query_transform_center

view_transf.query_translate_matrix(args)

View_transf: query_translate_matrix

view_transf.query_zclip(args)

View_transf: query_zclip

view_transf.redo()

Redo the undo.

view_transf.redraw_idle(args)

View_transf: redraw_idle

view_transf.region_tool_close()

View_transf: region_tool_close

view_transf.region_tool_deletepoint(p0)

View_transf: region_tool_deletepoint

view_transf.region_tool_point(p0, p1, p2, p3)

View_transf: region_tool_point

view_transf.reset_by_action()

Initializes the current action transformation, thus removing the effect of that transformation.

view_transf.reset_rot_trn_scl()

Removes the rotation, translation, and scale transformations in the selected viewports.

view_transf.reset_tool_constrain(p0)

Sets scope for the resetting of tool locations.

view_transf.reset_viewer()

View_transf: reset_viewer

view_transf.restore_view(p0)

Restores a previously saved view state file.

view_transf.revolution_axis(p0, p1, p2)

Sets the axis for the revolution tool.

view_transf.revolution_number_of_points(p0)

View_transf: revolution_#_of_points

view_transf.revolution_origin(p0, p1, p2)

Sets the origin point for the first end of the revolution tool.

view_transf.revolution_point(p0, p1, p2)

Defines the location of the given point in relation to the revolution axis.

view_transf.rotate(p0, p1, p2)

Specifies a rotation (in degrees about each of the axes).

view_transf.save_view(p0)

Save the current view state into a file.

view_transf.scale(p0, p1, p2)

Defines a scaling in each of the axis directions.

view_transf.select_tool(p0, p1, p2, p3)

Sets the location of the selection tool by setting normalized screen min and max values.

view_transf.sensitivity(p0)

View_transf: sensitivity

view_transf.sphere_axis(p0, p1, p2)

Sets the axis components for the sphere tool.

view_transf.sphere_origin(p0, p1, p2)

Sets the origin point for the first end of the sphere tool.

view_transf.sphere_radius(p0)

Defines the radius of the sphere tool.

view_transf.spin(p0, p1, p2, p3)

Applies a global rotation multiple times.

view_transf.spline_color(p0, p1, p2)

This command has not yet been documented.

view_transf.spline_copy()

This command has not yet been documented.

view_transf.spline_delete()

This command has not yet been documented.

view_transf.spline_description(p0)

This command has not yet been documented.

view_transf.spline_id(p0, p1)

This command has not yet been documented.

view_transf.spline_invert()

This command has not yet been documented.

view_transf.spline_line_style(p0)

View_transf: spline_line_style

view_transf.spline_load_fromfile(p0)

This command has not yet been documented.

view_transf.spline_load_frompart(p0)

This command has not yet been documented.

view_transf.spline_new()

This command has not yet been documented.

view_transf.spline_offset(p0, p1, p2)

This command has not yet been documented.

view_transf.spline_point_size(p0)

This command has not yet been documented.

view_transf.spline_point_visibility(p0)

This command has not yet been documented.

view_transf.spline_save(p0)

This command has not yet been documented.

view_transf.spline_select(p0)

This command has not yet been documented.

view_transf.spline_select_begin(*args, **kwargs)

This command has not yet been documented.

view_transf.spline_visibility(p0)

This command has not yet been documented.

view_transf.spline_width(p0)

This command has not yet been documented.

view_transf.splinepoint_copy()

This command has not yet been documented.

view_transf.splinepoint_create(p0, p1, p2)

This command has not yet been documented.

view_transf.splinepoint_delete()

This command has not yet been documented.

view_transf.splinepoint_edit(p0, p1, p2)

This command has not yet been documented.

view_transf.splinepoint_offset(p0, p1, p2)

This command has not yet been documented.

view_transf.splinepoint_paste()

This command has not yet been documented.

view_transf.splinepoint_select_all()

This command has not yet been documented.

view_transf.splinepoint_select_begin(*args, ...)

This command has not yet been documented.

view_transf.translate(p0, p1, p2)

Specifies a translation in each of the coordinate directions.

view_transf.undo()

Undo the last transformation or tool definition.

view_transf.view_center(p0, p1, p2)

View_transf: view_center

view_transf.view_center_and_direction(p0, ...)

View_transf: view_center_and_direction

view_transf.view_center_var_max(p0)

View_transf: view_center_var_max

view_transf.view_center_var_min(p0)

View_transf: view_center_var_min

view_transf.view_from_triad_axis(p0)

View_transf: view_from_triad_axis

view_transf.view_recall(p0)

View the model from a standard (or customized) view position.

view_transf.view_store(p0)

Stores a current View state as a state attached to one of the four customizable function keys.

view_transf.viewport_camera(p0)

This command has not yet been documented.

view_transf.viewport_link(p0)

Link the interactive global transformations of multiple viewports.

view_transf.viewport_state_copy()

Save the transformation state of the currently selected viewport (for the purpose of applying it to a different viewport with the "view_transf: viewport_state_paste" command.

view_transf.viewport_state_paste()

This command has not yet been documented.

view_transf.viewports(p0)

View_transf: viewports

view_transf.vr_scale(p0)

This command has not yet been documented.

view_transf.vr_worldcenter(p0, p1, p2)

This command has not yet been documented.

view_transf.vr_worlddiagonal(p0)

This command has not yet been documented.

view_transf.zclip_back(p0)

Sets the position of the back/front z-clip plane

view_transf.zclip_float(p0)

Sets the z-clipping state.

view_transf.zclip_front(p0)

Sets the position of the back/front z-clip plane

view_transf.zclip_min(p0)

Sets the minimum to which the front z-clipping plane is allowed to "float".

view_transf.zoom(p0)

Move the viewer closer or farther away.

view_transf.zoom_style(p0)

Select the zoom user interaction style.

view_transf.zoom_to_selectregion()

Perform the zoom according to the current location of the selection tool.